Two ways to protect your home
Go with our featured installer
One licensed, insured, and verified Point Clear pro, ready to go. One call and you're handled.
Get my quote →Compare up to 3 local quotes
When a hurricane's in the Gulf, the good installers book up fast. Three vetted local pros give you a far better shot at getting someone out before the storm hits — and you compare prices too. No pressure, no endless calls.
Compare quotes →Safety steps, what to do once the wind stops, emergency roof tarping, water-damage cleanup, power outages with medical equipment, and finding missing pets — all in one place.
Open the Disaster Help Hub →Hurricane Shutter Requirements in Point Clear
Point Clear falls under the International Building Code as adopted in Alabama, with a design wind speed of roughly 150 mph for this part of Baldwin County. Along the Alabama Gulf Coast the code adds coastal wind-design provisions — stronger roof-to-wall and wall-to-foundation connections and impact-rated openings — and hurricane protection products should carry a large-missile impact rating (tested to ASTM E1886/E1996). A building permit is required for permanent installations, and work must be completed by a licensed contractor.
Around Point Clear, Baldwin County's Building Inspection department issues permits for unincorporated areas through its CitizenServe portal and Coastal Area Program — including V-zone and elevation certificates near the water — while incorporated cities permit their own construction.
Wind Speed
~150 mph design wind speed (IBC, Baldwin County)
Product Approval
Large-missile impact rating (ASTM E1886/E1996); Miami-Dade NOA or Florida approval widely accepted
Permits
Baldwin County building permit required for permanent shutters.
Insurance
A wind mitigation inspection can unlock a 15–30% insurance premium credit.
Hurricane Shutter Costs in Point Clear, FL
Installed pricing in Point Clear runs roughly $8–$60 per square foot depending on product type and the number of openings. The estimates below reflect current Alabama market pricing for a typical single-family home. A whole-home accordion install commonly lands between $3,000 and $8,000.
| Product Type | Installed Price (per sq ft) | Best For |
|---|---|---|
| Storm Panels (aluminum) | $8–$15 | Budget-conscious, seasonal residents |
| Accordion Shutters | $20–$40 | Permanent protection, insurance credit |
| Roll-Down (manual) | $25–$45 | Large openings, clean look |
| Roll-Down (motorized) | $30–$60 | Convenience, remote operation |
| Bahama Shutters | $20–$35 | Coastal look, shade + protection |
| Hurricane Screens | $10–$20 | Lanais, large openings |
Can't Put Your Shutters Up Yourself?
Putting up panels means hauling them out, climbing a ladder, and drilling — usually in a rush as a storm bears down. For seniors and anyone with mobility or balance limits, that's not safe to do alone. Local crews will mount or deploy your shutters for you ahead of the storm, so your home is protected without you ever getting on a ladder.
Loading local help…
Why Shutters Matter in Point Clear
Point Clear's historic bayfront estates sit right on Mobile Bay, where hurricane surge pushes water onto the shore and wind comes off the open bay. Protecting large windows and doors with rated shutters is essential for these exposed waterfront homes.
Point Clear's bayfront has weathered generations of hurricanes off Mobile Bay, from Hurricane Frederic in 1979 to Ivan in 2004 and Sally in 2020. Homes sitting right on the eastern shore face surge pushed across the bay and wind coming straight off open water. The large windows and doors that make these waterfront homes desirable are also their most vulnerable points — and rated shutters are what keep wind and debris from turning a broken pane into a breached house.
How to HireFinding a Licensed Installer in Point Clear
Work only with licensed, insured local installers — here's how to check.
Step 1 — Verify Licensing
Check the Alabama Home Builders Licensure Board records for an active license. Never hire unlicensed.
Step 2 — Check Insurance
Require a current Certificate of Insurance showing General Liability and Workers' Compensation.
Step 3 — Verify Products
Ask for the product's impact rating or approval number (Miami-Dade NOA, Florida approval, or ASTM E1886/E1996) for every product on the quote.
Step 4 — Get 3 Quotes
Prices vary 20–40% across contractors. Get at least three written quotes before deciding.