Two ways to protect your home
Go with our featured installer
One licensed, insured, and verified Bon Secour pro, ready to go. One call and you're handled.
Get my quote →Compare up to 3 local quotes
When a hurricane's in the Gulf, the good installers book up fast. Three vetted local pros give you a far better shot at getting someone out before the storm hits — and you compare prices too. No pressure, no endless calls.
Compare quotes →Safety steps, what to do once the wind stops, emergency roof tarping, water-damage cleanup, power outages with medical equipment, and finding missing pets — all in one place.
Open the Disaster Help Hub →Hurricane Shutter Requirements in Bon Secour
Bon Secour falls under the International Building Code as adopted in Alabama, with a design wind speed of roughly 152 mph for this part of Baldwin County. Along the Alabama Gulf Coast the code adds coastal wind-design provisions — stronger roof-to-wall and wall-to-foundation connections and impact-rated openings — and hurricane protection products should carry a large-missile impact rating (tested to ASTM E1886/E1996). A building permit is required for permanent installations, and work must be completed by a licensed contractor.
Around Bon Secour, Baldwin County's Building Inspection department issues permits for unincorporated areas through its CitizenServe portal and Coastal Area Program — including V-zone and elevation certificates near the water — while incorporated cities permit their own construction.
Wind Speed
~152 mph design wind speed (IBC, Baldwin County)
Product Approval
Large-missile impact rating (ASTM E1886/E1996); Miami-Dade NOA or Florida approval widely accepted
Permits
Baldwin County building permit required for permanent shutters.
Insurance
A wind mitigation inspection can unlock a 15–30% insurance premium credit.
Hurricane Shutter Costs in Bon Secour, FL
Installed pricing in Bon Secour runs roughly $8–$60 per square foot depending on product type and the number of openings. The estimates below reflect current Alabama market pricing for a typical single-family home. A whole-home accordion install commonly lands between $3,000 and $8,000.
| Product Type | Installed Price (per sq ft) | Best For |
|---|---|---|
| Storm Panels (aluminum) | $8–$15 | Budget-conscious, seasonal residents |
| Accordion Shutters | $20–$40 | Permanent protection, insurance credit |
| Roll-Down (manual) | $25–$45 | Large openings, clean look |
| Roll-Down (motorized) | $30–$60 | Convenience, remote operation |
| Bahama Shutters | $20–$35 | Coastal look, shade + protection |
| Hurricane Screens | $10–$20 | Lanais, large openings |
Can't Put Your Shutters Up Yourself?
Putting up panels means hauling them out, climbing a ladder, and drilling — usually in a rush as a storm bears down. For seniors and anyone with mobility or balance limits, that's not safe to do alone. Local crews will mount or deploy your shutters for you ahead of the storm, so your home is protected without you ever getting on a ladder.
Loading local help…
Why Shutters Matter in Bon Secour
Tucked between the river and the Gulf near Gulf Shores, Bon Secour's fishing community sits only a few feet above the water, where surge moves readily up the river during hurricanes. Its near-coastal exposure makes high-rated shutters important for protecting the home's openings.
Southern Baldwin County has been struck repeatedly — Hurricane Ivan in 2004 and Hurricane Sally in 2020 both made landfall just miles from Bon Secour near Gulf Shores. Sitting low on the Bon Secour River between the water and the Gulf, this fishing community takes surge up the river and strong wind off the open water. When that surge arrives it brings the wind-driven debris that breaks unprotected glass, which is why near-coastal homes here need rated shutters on every opening.
How to HireFinding a Licensed Installer in Bon Secour
Work only with licensed, insured local installers — here's how to check.
Step 1 — Verify Licensing
Check the Alabama Home Builders Licensure Board records for an active license. Never hire unlicensed.
Step 2 — Check Insurance
Require a current Certificate of Insurance showing General Liability and Workers' Compensation.
Step 3 — Verify Products
Ask for the product's impact rating or approval number (Miami-Dade NOA, Florida approval, or ASTM E1886/E1996) for every product on the quote.
Step 4 — Get 3 Quotes
Prices vary 20–40% across contractors. Get at least three written quotes before deciding.